Sicherheitstechnik und Zubehör

für Standard-Holzbearbeitungsmaschinen



 Motor brakes for classical joinery machines

 

Suitable for motors make of Seimec - Rossi - APA, e.g. mounted in Panhans woodworking

machines and many other italian motors. 

Motor brake MLCC 90, 103 V DC, 7 Nm

for motors with a motor power from 1,1 kW, 1,5 kW and 2,2 kW and a motor size 90                      item-no. 60001

suitable, among other things, for the following machines: 

- Panhans BSB 400 - BSB 500 - BSB 600

Motor brake MLCC 90, 178 V DC, 7 Nm 

for motors with a motor power from 1,1 kW, 1,5 kW and 2,2 kW and a motor size 90                       item-no. 60016

suitable, among other things, for the following machines:

 - Agazzani bandsaws NRA, Rapid and Cosma

 

 

Motor brake MLCC 100, 103 V DC, 15 Nm

for motors with a motor power from 3,0 kW, 4,0 kW, 5,5 kW and 7,5 kW and a motor size 112        item-no. 60002

 suitable, among other things, for the following machines:

- Panhans surface planing machines

- Panhans thickness planing machines

- Panhans combined surface- and thickness planing machines

- Panhans panel saws and circular saws

- Panhans bandsaw BSB 700

 

 

The brakes are also mounted in other motors, to check if the brake suites for your motor you can check the dimensions and technical data in the following list: 

 

Gr.

M F

[Nm]

C

E

F

GA

H

J

K

I

L

L1

M

P

P1

Q

S

T

U

V1

Y1

weight

P

[W]

90MLCC

7

8

126

25

28,3

23

43

3,7

116

23

40

45

M5

M8

37

16

0,2

9,2

155

250

2,09

25

100MLCC

13

8

154

30

33,3

26

49

3,7

139

28

40

60

M6

M10

43

23

0,25

9,2

170

300

3,57

35

 

Rectifier RV 1-500 suitable for motor brakes MLCC 90 and 100

Prim. voltage 230 V AC - sec. voltage 103 V DC                                                                item-no. 60003


Rectifier 500 NBR-1 blue

Prim. voltage up to 500 V AC                                                                                             item-no. 60008   

Rectifier NBR 500-1 US white

Prim. voltage up to 500 V AC                                                                                               item-no. 60009 



Control unit Cosmo (replacement for Pilz control unit P4L1)

The control unit Cosmo is a replacement for the Pilz control unit P4L1 which is mounted in brake units MBS which was mounted in woodworking machines. (when on the existing P4L1 is no bridge mounted between pin P 1 and P2 it an additional thermistor protection necerssary) Cosmo is just applicable in combination with a MBS modul.            item-no. 60004

 

Door latch for bandsaws

The door latch is suitable for bandsaws make of Panhans - Eumacop - Agazzani, for wheel diameter 400 - 700 mm, dimension of door latch 70 mm.                                                                                                                 item-no. 60005

 

 

 

 

 

Door hinge for bandsaws

The door hinge is suitable for bandsaws make of Panhans - Eumacop - Agazzani, for wheel diameter 400 - 700 mm, dimension of door hinge 48 x 48 mm                                                                                                         item-no. 60006

Lubricator Perma

with activation screw for permanent lubrication of the spindle for the tilt on a Panhans spindle moulder type 245 (all models) and panel saw V 90 and V 91                                                                                                        item-no. 60007


Scale yellow made of steel with polyamid coating and self adhesive foil

from right to left, length 5000 mm, width 10 mm, suitable, among other things for Panhans panel saws (longitudinal fence left hand side of the sawblade), but also also for other use like crosscut saws, working tables and other longitudinal fences. Division in mm on the upper and lower side in black, ongoing indicated centimeter in black, decimeter numbers in red with self adhesive foil for easy mounting.                                                         item-no. 60010


Scale yellow made of steel with polyamid coating

from right to left, length 5000 mm, width 10 mm, suitable, among other things for Panhans panel saws (longitudinal fence left hand side of the sawblade) but also for other use like crosscut saws, working tables and other longitudinal fences. Division in mm on the upper and lower side in black, ongoing indicated centimeter in black, decimeter numbers in red.                                                                                                                                                        item-no. 60011

 

Scale yellow made of steel with polyamid coating and self adhesive foil

 

from left to right, length 2000 mm, width 13 mm, suitable, among other things, for Panhans panel saws (rip fence right hand side of the sawblade) but also for other use like crosscut saws, working tables and other longitudinal fences. Division in mm on the upper and lower side in black, ongoing indicated centimeter in black, decimeter numbers in red with self adhesive foil for easy mounting.                                                                                          item-no. 60012