Motor brake for classical joinery machines

Suitable for Seimec - Rossi - APA engines, e.g. installed in

Panhans, SAC and Maka machines and many other italian motors such as MT motori elettrici.

Motor brake MLCC 90, 103 V DC, 7 Nm

for motors with a power of 1,1 kW, 1,5 kW and 2,2 kW and a motor size 90 Item-no. 60001

suitable for the following machines:

- Panhans BSB 400 - BSB 500 - BSB 600

Motor brake MLCC 90, 178 V DC, 7 Nm

for motors with a power of 1,1 kW, 1,5 kW and 2,2 kW and a motor size 90 Item-no. 60016

suitable for the following machines:

- Agazzani Bandsägen NRA, Rapid, Cosma

Motor brake MLCC 100, 103 V DC, 15 Nm,

for motors with a power of 3,0 kW, 4,0 kW, 5,5 kW and 7,5 kW and a motor size 112 Item-no. 60002

suitable for the following machines:

- Panhans surface planing machines

- Panhans thickness planing machines

- Panhans comb. surface- and thickness planing machines

- Panhans sliding table saws

- Bandsaw BSB 700

The brakes are also installed in other engines. To check whether the brakes are suitable for your engine, you can find the exact technical data and dimensions in the table below:

Größe

M F

[Nm]

90MLCC

126

28,3

3,7

116

100MLCC

154

33,3

3,7

139

M10

Größe

Gewicht netto

[daN]

[W]

90MLCC

0,2

9,2

155

250

2,09

100MLCC

0,25

9,2

170

300

3,57

Rectifier 500-NBR 1 (replacement for RV1 500-1) blue

Primary voltage 230 V AC - Secondary voltage 103 V DC Dimensions approx. L 68,7 x B 36,2 x H 26 mm Item-no. 60008

Rectifier 500-NBR 1 US white

Incomming voltage up to 500 V AC Item-no. 60009

Control unit Cosmo (replacement for Pilz control unit P4L1)

The Cosmo control unit serves as a replacement for the Pilz P4L1 control unit which was used in MBS braking devices in woodworking machines (if terminals P1 and P2 are not bridged on the P4L1, then additional thermistor protection is required). Item-no. 60004

Thermistor protection relay 230 V AC

Can be used in conjunction with the Cosmo control unit if terminals P1 and P2 are not bridged. Item-no. 60015

Start switch for Panhans drilling machine 116

No. 538-34/1, setting range 3.2–5.5 A for machines with 1.5 kW motors. With 400 V undervoltage release.

Main switch 133054 for Panhans maschines

Replacement for main switch 117026, 133049, with 230 V undervoltage release. Suitable for older panel saws 684 and 690, surface planing machine 326, thickness planing machine 426 with star-delta switch, combined surface- and thickness planing machines 445-A and 446-A.

Star-delta-switch 22836 with brake release position for Panhans-maschines

Replacement for star-delta switch 118241, suitable for panel saws 684, 688, 687, 690, combined planer and thicknesser 445-A and 446-A, surface planing machines 324, 325 and 326, thickness planing machines 425 and 426 as well as tenoning and slotting machine 261.

Door lock for bandsaws

The door lock is suitable for band saws of the brand Panhans - Eumacop - Agazzani (Cosma, NRA, Rapid), for wheel diameter 400 - 900 mm, diameter of the door lock 70 mm

Item-no. 60005

Plastic door hinge for bandsaws

The door hinge is suitable for band saws of the brand Panhans - Eumacop - Agazzani (Cosma, NRA, Rapid), for wheel diameter 400 - 700 mm, dimension of the door hinge 48 x 48 mm

Item-no. 60006

Rubber tire siutable for Panhans bandsaw PB 53

Suitable for wheel diameter 530 mm, width 30 mm, thickness approx. 3 mm (The covering must be heated before installation, e.g. in a hot water bath, to activate the plasticizer in the polyurethane) Item-no. 60030

PVC-table insert for Panhans bandsaw PB 53

diameter 70 mm Item-no. 60031

Lubricator for Panhans tilting spindle moulder 245 (all models) and panel saw V 90 - V 91

with activation screw for permanent lubrication of the swivel adjustment Item-no. 60007

Scales measuring tape yellow made of steel with polyamide coating, with self-adhesive film, increasing from right to left, length 5000 mm, width 10 mm suitable among other things for Panhans panel saws on the length stop left of the saw blade, but also for other uses such as scales on crosscut saws, work tables, workbenches and other length stops

mm divisions on the top and bottom edges in black, continuous centimeter numbering in black, decimeter numbers in red with self-adhesive film on the back for easy application.

Item-no. 60010

Scales tape measure yellow made of steel with polyamide coating, rising from right to left, length 5000 mm, width 10 mm suitable among other things for Panhans panel saws on the length stop left of the saw blade, but also for other uses such as scales on crosscut saws, work tables, workbenches and other length stops

mm graduations on the top and bottom edges in black, continuous centimeter numbers in black, decimeter numbers in red without self-adhesive film

Item-no. 60011

Scales measuring tape yellow made of steel with polyamide coating, with self-adhesive film, increasing from left to right, length 2000 mm, width 13 mm suitable among other things for Panhans panel saws on the width stop to the right of the saw blade, but also for other applications such as scales on crosscut saws, work tables, workbenches and other length stops

mm graduations on the top and bottom edge in black, continuous centimeter numbers in black, decimeter numbers in red with self-adhesive film on the back for easy attachment

Item-no. 60012

Plastic covered bearing 6000 2 RS

Outer diameter 35 mm, bore 10 mm, plastic width approx. 13.2 mm, suitable for Panhans panel saws 684 up to approx. year of manufacture 1980 Item-no. 60035

Plastic covered bearing 6001 2 RS

Outer diameter 38 mm, bore 12 mm, plastic width approx. 14 mm, replacement for plastic-coated ball bearing 6201 zz, suitable for Panhans panel saws from model year approx. 1981

Brake release switch

Locking in the brake released position with one normally open contact block and one normally closed contact block. Suitable for Panhans surface planers 334-335-336, thickness planers 425, 426, 435, and 436, as well as combined surface and thickness planers 445-B and 446-B. Item-no. 60013

Quick clamping screw for main shaft

For clamping the main saw blade on Panhans panel saws 690-A, 690-B, circular saw 609 and combined circular saw-mortising machine 621-A, thread M 16 left, total length 50 mm Item-no. 60014

Time relay (conversion kit pneumatic time relay TP 40 IA)

Conversion kit for the pneumatic time relay TP 40 IA for use on Panhans spindle moulder 240, 250 and 259 with Märkischer switch combination 7346 (250 and 259) or 7350 (240) Item-no. 60500

Drill chuck B 24

suitable for Panhans mortise drilling machine type 116 with cone B 24 suitable for drills with shank 0-20 mm including protective sleeve and drill chuck hexagon key. Item-no. 60050