Sicherheitstechnik und Zubehör

für Standard-Holzbearbeitungsmaschinen

Guide rail angle set AG101 for hand-held circular saws - plunge saws

Item-no. 50101

With the help of the small AG101 angle set, you can complete smaller cutting tasks much faster and significantly minimize measurement errors.
This system can be used anywhere that requires fast and precise cuts, such as all types of gypsum fiberboard, wood concrete, MDF, steel panels, and facade insulation boards.

The guide rail is suitable for panels up to 120 cm wide.
With this set, you no longer need to mark anything; you simply adjust the rail
to the desired size. This way, you can be 100% sure that you will
cut your panels with the angle or bevel you require.
And the system is installed in just 3 to 4 seconds thanks to a magnetic lock.
The rails are equipped with holes that are positioned to the nearest hundredth of a millimeter to ensure the most precise work results.
The angle guide rail can also be used as a beveling square, measuring device, for shortening
wood, or for measuring angles on the wall. Weight: 4.7 kg

Fits all common hand-held circular saws such as Bosch, Makita, Festool, Hilti,
DeWalt, Mafell, Milwaukee, Metabo, and more (not suitable for Skil)

Application area: Panel width: 120 cm
Panel length: 122 cm
Angle: +75° / -26°
Scope of delivery: Main rail 122 cm with bracing
Guide rail 150 cm

Guide rail angle set AG200 for hand-held circular saws - plunge saws

Item-no. 50200

With the medium-sized AG200 angle set, you can complete most of your cutting tasks
faster and easier, avoiding measurement errors that easily occur when marking with a pencil
and ruler. Simply adjust the rails to the desired size.
Then cut the panel quickly and precisely with the angle or bevel you need.

For the best possible result, the holes in the rails are positioned to the nearest hundredth. This guarantees precise measurements every time. The entire system is assembled with a magnetic lock in just 3 to 4 seconds.
The guide rails of this system allow you to cut panels up to 60 cm or 120 cm wide. Furthermore, you can connect the rails, allowing you to work with panels up to 210 cm wide. The main rail has a measuring scale up to 251 cm and a mechanical end stop. This allows you to effortlessly cut individual sections without having to mark each one individually.

Use the system to cut all types of gypsum fiberboard,
wood concrete, MDF, steel panels, and facade insulation. The individual system components
can also be used as measuring devices, bevel angles, for shortening wood, or
for measuring angles on walls. The system offers you various options
for everyday work. Weight: 7.4 kg

Fits all common hand-held circular saws such as Bosch, Makita, Festool, Hilti,
DeWalt, Mafell, Milwaukee, Metabo, and more (not suitable for Skil)

Application area: Panel width: 60 cm and 120 cm
Panel length: 122 cm or 251 cm
Angle: +75° / -75°
Scope of delivery: Main track 122 cm with bracing
Extension for main track up to 251 cm
Guide track 90 cm
Guide track 150 cm
End stop/fixing bracket
Connecting fitting

Guide rail angle set AG201 for hand-held circular saws - plunge saws

Item-no. 50201

With the medium-sized AG201 angle set, you can complete most of your cutting tasks
faster and easier, avoiding measurement errors that easily occur when marking with a pencil
and ruler. Simply adjust the rails to the desired size.
Then cut the panel quickly and precisely with the angle or bevel you need.

For the best possible result, the holes in the rails are positioned to the nearest hundredth. This guarantees precise measurements every time. The entire system is assembled with a magnetic lock in just 3 to 4 seconds.
The guide rails of this system allow you to cut panels up to 90 cm or 120 cm wide. Furthermore, you can connect the rails, allowing you to cut panels up to 240 cm wide. The main rail has a measuring scale up to 251 cm and a mechanical end stop. This allows you to effortlessly cut individual sections without having to mark each one individually.

Use the system to cut all types of gypsum fiberboard,
wood concrete, MDF, steel panels, and facade insulation. The individual system components
can also be used as measuring devices, bevel angles, for shortening wood, or
for measuring angles on walls. The system offers you various options
for everyday work. Weight: 7.4 kg

Fits all common hand-held circular saws such as Bosch, Makita, Festool, Hilti,
DeWalt, Mafell, Milwaukee, Metabo, and more (not suitable for Skil)

Application area: Panel width: 90 cm and 120 cm
Panel length: 122 cm or 251 cm
Angle: +75° / -75°
Scope of delivery: Main track 122 cm with bracing
Extension for main track up to 251 cm
Guide track 120 cm
Guide track 150 cm
End stop/fixing bracket
Connecting fitting

Guide rail angle set AG300 for hand-held circular saws - plunge saws

Item-no. 50300

With the large AG300 angle set, you can complete almost all your cutting tasks faster and reduce the risk of measuring errors. Simply adjust the rail to the desired size. Then cut the panel with the exact bevel or angle you need. The system is installed with a magnetic lock
within 3 to 4 seconds.

With the guide rail system, not a single pencil mark is necessary. The holes in the rails are positioned precisely to the nearest hundredth of a millimeter. This guarantees a result with minimal deviations.

The various guide rails allow you to cut gypsum fiberboard, wood concrete, MDF, steel panels, or insulation boards for facade insulation up to 40 cm, 60 cm, 90 cm, or 120 cm wide. If you connect the rails together, you can even work with panels up to 240 cm wide. The main rail has a measuring scale up to 251 cm, and the set includes a mechanical end stop. This allows you to make repeated cuts or cut patterns without having to measure each time.

If you connect the 51 cm long guide rail to the main rail of the angle stop
and an end stop, you have an ideal tool for cutting
wood or Eternit panels. The system then provides you with both
angle and length measurements for the material to be cut.

The large angle set also includes a routing set for gutter brackets,
which can be used to cut out grooves for gutter brackets. This allows you to determine the direction of the grooves and the distance between the gutter brackets, and to secure the machine so the angle remains consistent. Weight: 10.5 kg

Fits all common hand-held circular saws such as Bosch, Makita, Festool, Hilti,
DeWalt, Mafell, Milwaukee, Metabo, and more (not suitable for Skil)

Application area: Panel width: 40 cm, 60 cm, 90 cm, and 120 cm
Panel length: 122 cm or 251 cm
Angle: +75° / -75°
Scope of delivery: Main track 122 cm with bracing
Extension for main track up to 251 cm
Guide track 51, 90, and 150 cm
End stop/fixing bracket (2 pieces)
Connecting fitting
Main track 61 cm
Grooving cutter 27 mm diameter
Stop/fixing bracket

Guide rail angle set for hand-held circular saws - plunge saws including gutter holder cutter for routers Item-no. 50100

With the GB100 Gutter Bracket Milling Set, your milling work for installing gutter brackets becomes child's play. Thanks to this tool, you can effortlessly maintain even spacing between the gutter brackets, determine the direction of the cutouts, and secure the machine so that it doesn't pull to one side.

You simply need to adjust the machine to the desired dimensions, and you can now perform the cutouts on an entire roof side – in much less time than with the "folding rule and pencil method." When using the milling system, you don't have to worry about measurement errors – it maintains the exact dimensions with every cutout.

The template is used to cut out the recesses for gutter brackets on the
eaves and is suitable for both plywood and particleboard.
Application: Spacing between gutter brackets: up to 61 cm

If you also have the angle cutting set, a distance of up to 122 cm between the cutouts is possible.

Scope of delivery: Main rail 61 cm
Guide rail 51 cm
Groove cutter 27 mm diameter
Stop/lock

Guide rails for hand-held circular saws individually

The guide rails are suitable for use with plunge-cut saws, but are also designed for cutting with a knife. You can combine the rails with your regular guide rails, as the principle is identical. Screw clamps, etc., also fit.

Because the adhesive tape on the back of the rails has very high friction resistance,
you can be sure that the rails won't slip. You can use the rails individually or together with the angle unit for cutting all types of gypsum fiberboard, wood concrete, MDF, steel panels, and facade insulation.
If the work requires the utmost precision, you should use a rail that is
30 cm longer than the workpiece to be cut. It is important that the saw is
on a solid surface before you start sawing.

Area of application: The rails are primarily intended for cutting panels that are 30 cm shorter than the rails.

Guide rail 51 cm – Item-no. 50051
Guide rail 90 cm – Item-no. 50090
Guide rail 120 cm – Item-no. 50120
Guide rail 150 cm – Item-no. 50150
Guide rail 270 cm – Item-no. 50270

Transport bag Item-no. 51500

Suitable for all sets

Tragfix-panel carrier HGPT 1 0-40 mm Item-no. 50504

Tragfix-panel carrier HGPT 2 0-70 mm Item-no. 50505

The proven, lightweight and easy to handle tool for easy and gentle to material way to carry every kind of panels. Solid, galvanised steel support with three rubber coated gripper which protect the panels during transport. Spare rubber available!

UNI-panel carrier HGUP 0 - 65 mm Item-no. 50502

The UNI-panel carrier is characterized by:

It's high load capacity (forged steel body) despite it's extremly low weight.
The clamping force depends on the weight of the panel.
The application range for all panel materials (Chipboard, solid wood, plastic, plasterboard etc.) with a
It's ergonomic rubber grip.
The proofen special clamping jaws with grippy rubber we use in our Uni-clamp.
The new "U-shape" (with this new shape it's also very easy to pull the panels horizontally).
It's convenient shape and attractive design.

Door lifter HGTH 1 Item-no. 50500

The door lifter HGTH 1 is the perfect tool for professionals, carpenter, painters, glasser, metal worker, facility manager, hobbist ect.

For carpenter a constantly recurring work is the montage and dismantling of doors and gates. With the door lifter this work is a child's play. First assembly, adjustment or maintenance of heavy doors can be done very easy by one person.

It's not only possible to lift doors but also insert diverting walls, lifting furniture and other subjects and displace for just a few mm.

Made of solid, galvanised metal construction for lifting, lowering and pivoting with foot pressure!

Load capacity 120 kg

Door lifter HGTH 2 Item-no. 50501

The door lifter HGTH 2 is an useful helper to remove heavy and bulky doors. First assembly, adjustment or maintenance of heavy doors can be done very easy by one person.

It's not only possible to lift doors but also insert diverting walls, lifting furniture and other subjects and displace for just a few mm.

Load capacity 110 kg

S-drilling jig HGBL – SET Best-Nr. 50506

The S-drilling jig enables precise and fast drilling for cabinet knobs, door handles and all other holes in different kind of doors.

The hole distance is individually adjustable from 64 to 1400 mm and the side distance from 15 to 200 mm. This ensures that all holes in a serie have the same hole distance and the same distance to the outer edge. The setting can be done by the integrated milimeter scale or simply by attaching a furniture handle to the adjusting tip.

Extension available.

Drilling jig BLLB - SET Best-Nr. 50530

Drilling jig for quick and easy drilling of holes for hardware such as knobs and handles on drawers and doors. The horizontal ruler is made of stainless steel and has a graduation of 200-0-200 mm (total length 400 mm). The vertical ruler is made of anodized aluminum and has a graduation of 0-250 mm.

The four drill sleeves are designed for use with a 5 mm drill bit and are made of hardened steel. They come with an adjustable aluminum stop ruler and a plastic side stop, attached to a drill sleeve holder. The hole spacing can be easily adjusted using the measuring scales and clamped with knurled screws.

Self-centering dowel drilling jig BLSZ (Set) Item-no. 50520

Consisting of 9 drill sleeves (3 x 6 mm, 3 x 8 mm, 3 x 10 mm) and 3 positioning pins (6, 8 and 10 mm), clamping range 17 - 60 mm, material aluminum, solid design.